Analog I/O | Data Acquisition & Control | Products
Isolated Low Price Analog Output Board for ISA
DAI12-4C(PC)
DAI12-4C(PC) is the high-speed isolated D/A conversion board with opto-isolated bus. Though it is an isolated type, conversion speed is 24µsec/channel. 4-20mA current output is also available to connect with instrumentations.
Certification
CE
Environmental
Features
- The external signal is Opto-isolated.
- D/A conversion is performed at high speed. Since conversion is started, output voltage reaches a setting value by about 20 - 24µsec.
- Four channels of analog output.
- After staring up, the reset circuit keeps all output channels at the bottom of the output range.
- It has the reset command which changes an interface board into an initial state (power-on state).
- Opto-isolated 4 digital outputs by open collector and 2 digital inputs by current driver with negative logic.
Specification
Analog I/O
Bus
ISA Function
Output Input channel
Input range
Output channel
4ch Output range
0 -- 5V Output range
4 -- 20mA Resolution
12bit A/D conversion speed
D/A conversion speed
24µsec/ch(max.) Digital I/O
Bus
ISA Function
I/O Input
2 Output
4 Bidirection
Response speed
1msec(max.) Operation voltage
Input: 12--24VDC Operation voltage
Output: 12--24VDC Built-in power supply
Input circuit
Opto-isolated input (Sink output) Output circuit
Opto-isolated open collector output (Sink type) Options
| Product Code | Product |
|---|---|
| API-AIO(98/PC) | Windows version Analog I/O Driver |
| API-PAC(W32) | Driver Library CD-ROM version |
| DTP-3A | Screw Terminal (M3 x 37) |
| DTP-4A | Screw Terminal (M2.6 x 37) |
| EPD-37 | Screw Terminal (M3.5 x 37) |
| EPD-37A | Screw Terminal (M3 x 37) |
| PCA37P-1.5 | 37pin D-type(M) to Open-Ended, Flat Cable(1.5m) |
| PCA37P-3 | 37pin D-type(M) to Open-Ended, Flat Cable(3m) |
| PCA37P-5 | 37pin D-type(M) to Open-Ended, Flat Cable(5m) |
| PCA37PS-0.5P | A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m) |
| PCA37PS-1.5P | A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m) |
| PCA37PS-3P | A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 3m) |
| PCA37PS-5P | A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 5m) |
| PCB37P-1.5 | 37pin D-type(M) at Each End, Flat Cable(1.5m) |
| PCB37P-3 | 37pin D-type(M) at Each End, Flat Cable(3m) |
| PCB37P-5 | 37pin D-type(M) at Each End, Flat Cable(5m) |
| PCB37PS-0.5P | 37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost |
| PCB37PS-1.5P | 37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost |
| PCB37PS-3P | 37pin D-type(M) at Each End, Shield Cable(3m) Low Cost |
| PCB37PS-5P | 37pin D-type(M) at Each End, Shield Cable(5m) Low Cost |
